RFQ response: within RFQ response: 24 business hours qlcl@fe2tech.com
MON–SAT · 8:00–17:00 GMT+7
+84 707 733 399 +84 968 860 386 qlcl@fe2tech.com Service feedback: tinluu@fe2tech.com ENVI
Home / Markets

Where our parts ship

Approximate output by market | United States: about 50%; Japan: about 20% | Other markets: South Korea, EU, Australia, Vietnam.

9Countries served
8Export markets
4Continents
ISO9001:2015 certified
24 hQuotation
Share of output

Where our parts ship

What changes between markets is the paperwork, the drawing convention and the lead time you need.

  • United States 50%
  • Japan 20%
  • South Korea 10%
  • European Union 10%
  • Vietnam 10%

United States

Largest market 50%

United States | Products: aerospace ground support tooling, machinery parts, jigs/fixtures | Drawings: inch | Conversions checked | Reports: inch and mm.

Inch-system drawingsCMM report in inch + mmAerospace GSE toolingJigs & fixturesMachinery replacement parts

Japan

Benchmark market 20%

Japan | Products: hardened tool steel mould and die components, wire-cut and ground | Inspection: first article approval, in-process QC, deviations reported with measured values.

Mould & die componentsHardened tool steelWire EDMFirst-article discipline

South Korea

Automotive & automation 10%

South Korea | Products: bolts, fasteners, bearing jigs, electrical cabinet and automation components | Rolled thread on request | Repeat delivery schedule | Operation: 3 shifts/day.

Bolts & fastenersRolled threadBearing jigsAutomation components

European Union

Germany · Netherlands · Denmark · Bulgaria 10%

Europe | Products: cargo bike components, optical mounts, audio equipment chassis | EN 10204 3.1 on request | Grade changes need written approval | ISO 9001:2015 issued by URS.

EN 10204 3.1 certificatesISO 9001:2015 · URSCargo bike componentsOptics & audio

Vietnam

Domestic 10%

Vietnam | Products: oil and gas components, assembly jigs/fixtures, short runs | Factory visits: scheduled in advance.

Oil & gas componentsJigs & fixturesShort-run workFactory visits

Australia | Products: sheet metal and welded structures | Output included in the overall figures, not shown separately.

Process and documentation

Consistent production process with market-specific documentation

Machining and acceptance per drawing | Shipment documents per customer requirements.

  • Drawing unitsInch or mm | Conversions recorded and checked.
  • Inspection reportIssued in both inch and millimetre values
  • MaterialMill test certificates to EN 10204 3.1 on request
  • SubstitutionWritten approval required.
  • Quality systemISO 9001:2015, certified by URS. See the certificate
  • PackingVCI or ESD on request | Labels to customer specification.
  • DispatchAir or sea, with documents attached

Send a drawing for a quote

STEP / IGES + 2D PDF · Material grade · Quantity · Tolerance · Finish

Start an RFQ → Contact via WhatsApp

Or write to qlcl@fe2tech.com · Call +84 707 733 399 · +84 968 860 386

WhatsApp